cowboysew

dot  Leathercraft tools for Saddlery & Leather Crafts

  Die cutting press for leather goods and footwear

dot  Industrial leather splitting and skiving machine

dot  Hot knife cutting machines for slings and ropes


801

CowBoy CB-10 Hydraulic Clicker Press

The Cowboy Model CB-10 hydraulic clicker press offers an excellent combination of value and versatility. This clicker press offers a higher tonnage alternative to other lower rated machines in the market, and yet the price of the leather clicker press is very affordable. This hydraulic swing beam clicker press can be used to both emboss leather using an embossing plate and cut leather using steel rule cutting dies. There are 4 different tonnages available in this series: CB-10, CB-12, CB-16 and CB-20 Hydraulic Clicker Press.

The heavy duty hydraulic pump and cylinder of this clicker press is designed for heavy use cycles in an industrial setting. Yet this hydraulic clicker press is priced low enough that it is easily affordable for the small shop owner.

The hydraulic swing beam clicker press features an adjustable stroke timer which allows the user to control how long the machine takes to complete a compression cycle by virtue of the length of the stroke. For instance if an individual were cutting with steel rule dies the cycle time can be set for the quickest time and shortest stroke. If an individual were using the machine to emboss work using an embossing plate, the cycle timer could be set for maximum delay and longest stroke to allow for the embossing plate to leave a deep and crisp impression on the work.

The die cutting press machine has a fail safe safety mechanism built in using two joystick controllers. Both buttons must be pressed simultaneously in order for the machine to cycle. This keeps the operator's hands clear of the work.


801

Cowboy CB-22A Hydraulic Swing Arm Clicker Press

The Model CB-22A, CB-25A, and CB-28A leather and heavy material clicking machines offer the absolute best in product performance, reliability and versatility. These hydraulic swing arm clicker press are sold in 22, 25, and 28 ton versions respectively. These hydraulic swing beam clicker presses are available with a selector switch on the machine (optional) to vary the tonnage of each machine depending on usage or application. The selector switch varies the power available to the cutting deck in three different settings: Low, medium, and high. This allows the user to determine the correct power setting based on the the size of the cutting die or embossing plate used.

The Cowboy CB-22A, CB-25A, and CB-28A leather clicker presses also feature variable stroke timer settings which allow the user of the machine to regulate the amount of time it takes to vary the down stroke of the machine. This enables the user to regulate the time the machine takes to complete a stroke cycle. This is a very useful tool when using the machine for embossing functions, where a longer stroke time is desired.

These hydraulic clicker press, also feature many interchangeable parts with the ATOM clickers and the design has been proven over many years of service.


801

Cowboy CB-10 ECO Hydraulic Clicker Press

The Cowboy Model CB-10 ECO swing arm presses offers an excellent combination of value and versatility. This clicker press offers a higher tonnage alternative to other lower rated machines in the market, and yet the price of the leather clicker press is very affordable. This hydraulic swing beam clicker press can be used to both emboss leather using an embossing plate and cut leather using steel rule cutting dies.

The comparatively low price of the CB-10 ECO when compared to other smaller tonnage machines in the market makes it an ideal choice for the small shop or manufacturer that is seeking a machine capable of producing higher tonnage than the 8-10 ton machines available in this price range. A full 10 tons of power is available with the CB-10 ECO machine at a price that is competitive with much smaller machines.

The CB-10 ECO swing beam die cutting press runs off of commonly available 220v single phase current. Many clicker presses of this type are made to run on 3 phase current, making them impractical for the small shop owner. The CB-10 ECO hydraulic clicker press is set to run on 220v single phase at no additional charge.








Copyright 2006 cowboysew.com.All rights reserved.